Local boiler installer · Epsom
Boiler Installation & Replacement in Epsom
Combi, system and heat-only boilers. Replacements and conversions, carefully installed by Adam.
Combi swaps from £2,750 inc. VATSuitable same-position swaps. Final quote confirmed after assessment.
Boiler installation options
A choice of boiler. The same careful installation.
Boiler options for your home
Adam replaces combi, system and heat-only boilers, and carries out conversions and relocations. Every installation is assessed and confirmed in a fixed written quotation.
Replacing an existing combi?
Compare the three same-position swap options below. Starting prices include VAT; photos or a survey confirm suitability and the final specification.
Essential
From £2,750Including VAT · supplied and fitted
A budget-conscious boiler for a suitable home. Example: Worcester Greenstar 1000 24kW, with suitable standard controls.
Comfort
From £3,450Including VAT · supplied and fitted
A balanced specification for everyday comfort. Example: Worcester Greenstar 4000 30kW, with suitable programmable controls.
Premium
From £4,250Including VAT · supplied and fitted
A higher-specification boiler with suitable smart controls. Example: Worcester Greenstar 8000+ 32kW, tailored to your home.
Prefer another brand? Ask about Vaillant ecoFIT pure or ecoTEC plus, Ideal Logic or Vogue, and other suitable options.
What’s included
The specified boiler and controls, standard horizontal flue, magnetic filter, routine system cleaning and inhibitor, removal of the old boiler, installation, commissioning and handover. Applicable manufacturer registration and Gas Safe notification are included. Your written quotation confirms the model, controls, guarantee conditions and full scope, including VAT.
Is my swap suitable?
Starting prices apply to straightforward natural-gas combi-to-combi swaps in the same position, with suitable existing pipework, straightforward access and a standard horizontal flue. Photos or a survey confirm suitability. Relocations, conversions, extended or vertical flues, gas-pipe upgrades, remedial work and any additional cleaning needed are quoted separately before you agree to proceed.
Gas supply and other checks
The existing gas supply must be suitable for the chosen boiler and other connected gas appliances. Adam checks the pipe sizing and supply requirements, heating and hot-water needs, flue, condensate route, controls, space and access. Matching the old boiler’s kW rating alone does not confirm a suitable swap. Any gas-pipe upgrade or other remedial work needed is explained and priced in the written quotation before you agree to proceed.
Starting prices are subject to suitability checks and the agreed specification. Any necessary additional work is included in your final fixed quotation before booking.
Straight advice first
Do you actually need a new boiler?
Not every fault means replacement. Adam considers the boiler’s age, condition, parts availability, repair cost and the wider heating system before recommending the sensible route.
If a worthwhile repair is the better option, Adam will say so. If a new boiler is the sounder long-term choice, you will understand why.
Fast first step
Send photos online
Photos of the boiler, flue, pipework, controls and airing cupboard can help Adam understand the likely scope before arranging a survey.
- Speak directly with the engineer
- Explain what is wrong or what you want to improve
- Get useful initial guidance without sales pressure
A simple, careful process
From first conversation to a properly commissioned boiler
You deal with Adam throughout. The specification is based on your property and hot-water needs, rather than choosing the same boiler for every home.
Tell Adam what you need
Call, WhatsApp or use the enquiry form. Photos are useful for initial advice.
Survey and specification
The existing system, flue, controls and heating requirements are assessed.
Fixed written quotation
The recommended boiler and scope are explained clearly before you decide.
Install and handover
The boiler is fitted, commissioned, notified and its controls explained.
More than a box on the wall
What a proper boiler installation considers
The boiler, flue, condensate, controls, pipework and condition of the heating system all affect safety, comfort and long-term reliability.
A recent example: during a Worcester Greenstar 4000 combi replacement in a Sutton flat on 6 October 2026, Adam also properly sealed the flue and corrected the existing pressure-relief discharge arrangement. See the finished Sutton installation.
Before installation
- Existing boiler and system assessed
- Heating and hot-water needs discussed
- Boiler position and flue route checked
- Controls and system layout reviewed
During the work
- Old boiler removed safely
- New boiler and pipework fitted carefully
- System cleaning and protection considered
- Filter and controls fitted where specified
At completion
- Boiler tested and commissioned
- Benchmark record completed
- Gas Safe notification and manufacturer registration completed where applicable
- Controls and operation explained
Real local work
An Epsom boiler conversion done properly
This home needed more than a simple swap. Adam removed the ageing boiler and redundant tanks, converted the heating layout and made good the surrounding areas.
The ageing boiler and original installation before work began.
Worcester Greenstar 4000 30kW combi with neat new copper pipework.
See another Epsom boiler replacement: Ideal to Worcester 27Ri
The right option for the property
New boilers, replacements and conversions
Adam installs replacement boilers and advises on sensible system changes for Epsom homes, landlords and property managers.
Combi boiler installation
Replacing an existing combi or converting an older stored-water system, with hot-water performance and the wider pipework considered properly.
System and heat-only boilers
Suitable options for homes retaining a hot-water cylinder, including older layouts where pumps, valves, tanks and controls need careful assessment.
Worcester Bosch, Vaillant and Ideal boilers
Adam advises on suitable boilers from manufacturers including Worcester Bosch, Vaillant and Ideal. Already have a preferred brand? Tell Adam when you enquire. The recommendation considers your heating and hot-water needs, the existing system, available space and budget.
Controls and protection
Appropriate heating controls, inhibitor, filters and system cleaning can be included where they are needed to protect the new installation.
A balanced decision
Repair or replace?
There is no universal answer. The useful question is which option makes sense for this boiler, this heating system and your plans for the home.
Repair may be better when…
- The boiler is generally reliable
- The fault is minor or common
- Replacement parts remain available
- The repair cost is proportionate
- The wider heating system is working well
A new boiler may be better when…
- Breakdowns are becoming regular
- The repair is expensive for the boiler’s age
- Parts are obsolete or difficult to obtain
- Your heating or hot-water needs have changed
- You want a considered long-term solution
Recommended locally
What customers say about Adam
5.0 · Read current reviews
Adam was brilliant. Super efficient, the work done was top notch, everything was left tidy. I would highly recommend.Richard
Fantastic boiler installation and conversion, plus boiler service every year since. Neat and tidy, reliable, reasonable, upfront and honest.Jack
Extremely professional and highly personable. Definitely use Adam.Adrian · Local Guide
Genuinely local
Boiler installation focused on Epsom homes
Adam Stapley Plumbing is based in Epsom and provides boiler installation, replacement and heating advice across the local area. You speak directly with the engineer who will assess and carry out the work.
Nearby work also covers Ewell, Ashtead, Stoneleigh, Cheam, Worcester Park, Banstead and Sutton, subject to availability.
Based in Epsom, Surrey
For new boiler installation, replacement and conversions, speak directly with Adam rather than a call centre.
Questions before you decide
Boiler installation and replacement FAQs
Is boiler installation different from boiler replacement?
Customers often use both phrases for the same job. A boiler replacement means removing an existing boiler and installing a new one; “boiler installation” also covers first-time installations and conversions. Adam can advise on straightforward swaps as well as more involved system changes.
How much does a boiler replacement cost in Epsom?
Qualifying same-position combi swaps start from £2,750 for Essential, £3,450 for Comfort or £4,250 for Premium, all including VAT. Photos or a survey confirm the suitable boiler and any additional work. Adam provides a fixed written quotation before you book. Relocations and system conversions are quoted individually.
Do I need a new boiler, or can mine be repaired?
It depends on the fault, age, condition, repair cost, parts availability and the wider heating system. Adam will recommend repair when it remains the sensible option rather than pushing an unnecessary replacement.
Can I send photos before a visit?
Yes. Photos of the boiler, flue, controls, nearby pipework and any airing-cupboard or loft tanks can help Adam understand the likely scope and give more useful initial advice.
How long does a boiler replacement take?
Most straightforward boiler swaps are completed in one day. Conversions, relocations and more involved heating-system changes take longer. Adam confirms the expected duration after assessing the job.
Can you arrange an urgent or next-day boiler installation?
Sometimes, depending on the job and availability. If you have no heating or hot water, contact Adam to discuss the problem and check the earliest suitable installation date. Next-day installation is not guaranteed.
What manufacturer guarantee will my new boiler have?
The guarantee depends on the manufacturer, boiler model and installation specification. Adam confirms the applicable cover and any registration or servicing requirements in the written quotation, so you know what applies to your chosen boiler.
Can you replace a Vaillant, Ideal or Worcester Bosch boiler?
Yes. Adam can advise on replacing an existing Vaillant, Ideal or Worcester Bosch boiler. Your new boiler does not have to be the same brand as the old one. The recommendation considers your heating and hot-water needs, the existing system, available space and budget, with any changes to the installation explained in your written quotation.
Are you Gas Safe registered?
Yes. Adam Stapley Plumbing is Gas Safe registered under registration number 234795.
Which type and brand of boiler should I choose?
The right answer depends on the property, hot-water demand, existing system, available space and budget. Adam can advise on suitable combi, system or heat-only boilers and options from established manufacturers such as Worcester Bosch, Vaillant and Ideal.
What happens after the boiler is installed?
The new boiler is commissioned, the Benchmark record is completed, the installation is notified through Gas Safe where required and Adam explains how to use the boiler and controls.
Do you install boilers for landlords?
Yes. Adam helps homeowners, landlords and property managers with boiler installation, replacement, servicing, repairs and gas safety certificates in the local area.
No call centre
Your boiler enquiry
Adam will reply promptly. No obligation to proceed.
- For Epsom and nearby local areas
- No obligation to proceed
- Add photos directly to your online request
Plan your next step
Your boiler plan
Adam confirms the suitable specification, final fixed quotation and appointment availability before a booking is agreed. No payment is taken here.
Your quotation and dates are confirmed before booking.
Optional — send photos with your enquiry.
Your details are used only to respond to this enquiry. You can upload photos here or use WhatsApp if you prefer.
Ready when you are
Planning a new boiler in Epsom?
Request a survey, share your boiler photos online or call Adam for straightforward advice and a clear written quotation.